Sewer Cleaning Vacuum Truck
Key Advantages of Our 3-Cubic Meter Combination Sewer Cleaner:
High-Efficiency Vacuum Performance
Equipped with a industry-leading vacuum pump, the truck delivers powerful suction and an extended suction range. It is exceptionally effective for the evacuation, transportation, and disposal of sludge and sediment from sewers and confined spaces.User-Friendly Operation
The system integrates an anti-overflow tank sealer, a complete vacuum pump assembly, and an efficient oil-gas separation pipeline. Its robust self-discharging capability significantly simplifies workflow and reduces operational complexity.Enhanced Durability & Corrosion Resistance
The tank and all metal components undergo a pre-coating phosphating treatment. They are subsequently spray-coated with a polymer anti-corrosion primer and a durable metal topcoat, ensuring superior adhesion and exceptional long-term resistance to corrosion.Improved Environmental Compliance
Powered by a standard-compliant engine, the truck achieves cleaner emissions. This design actively reduces the environmental impact of exhaust pollutants, supporting more sustainable operation.Compact Maneuverability for Urban Use
The 3-cubic meter capacity offers an optimal balance of utility and size. Its compact design ensures superior maneuverability in dense urban environments and restricted access areas where larger trucks cannot operate efficiently.Low Maintenance & Operational Economy
Built with high-quality components and a robust chassis, the truck is engineered for reliability and extended service life. This design minimizes downtime and maintenance costs, leading to a lower total cost of ownership.
The main components of cleaning the suction trucks include the following:
1. Chassis: The chassis is one of the largest and most important components of a sewage absorbing vehicle, providing the driving foundation for the vehicle.
2. Tank body: The tank body is used to carry negative pressure and store sewage, usually made of high-quality materials to ensure durability and sealing.
3. Pump: Cleaning the suction trucks are usually equipped with oil type vacuum pumps and water type vacuum pumps to generate negative pressure and achieve the suction and discharge of sewage.
4. Power take-off: The power take-off is used to obtain power from the vehicle engine and drive the operation of the pump.
5. Drive shaft: The drive shaft connects the power take-off and pump, transmitting power.
6. Hydraulic part: including hydraulic pump and cylinder, used to control the opening and closing of the tank body.
7. Pipeline system: including suction pipes, discharge pipes, etc., used to connect tanks and pumps to achieve the suction and discharge of sewage.
8. Vacuum pressure gauge: used to display the pressure inside the tank to ensure safe operation.
9. Fecal observation window or pipe: used to observe the liquid level and status of sewage in the tank.
10. Four way valve or vacuum anti overflow valve: prevents the tank from overflowing due to excessive pressure during transportation.
These components work together to enable the suction truck to efficiently and safely complete the collection and transportation tasks of sludge and sewage.
【Technical parameters of the entire vehicle】 | |||
Product trademark | Xiangnongda brand | Announcement Batch | 398 |
Product Name | Product model | SGW5044GQWCA6 | |
Total mass (Kg) | 4495 | Tank volume (m3) | 3.16 |
Rated load capacity (Kg) | 1545 | Dimensions (mm) | 5550*2010*2200 |
Curb weight (Kg) | 2820 | Axle load (Kg) | 2060/2435 |
Cab capacity (persons) | 2 | Maximum speed (Km/h) | 95 |
Approach Angle/Departure Angle (degrees) | 18/14 | Front suspension/rear suspension (mm) | 1155/1595 |
remarks | ABS manufacturer/model: 1. Zhejiang Wan'an Technology Co., Ltd./VIE ABS-II. 2. Guangzhou Ruili Kemi Automotive Electronics Co., Ltd./CM4YL The side protection is welded and connected with Q235 material, and the rear protection is welded and connected with Q235 material. The cross-sectional size of the rear protection (mm) is 100 × 50, and the height of the rear protection above the ground (mm) is 420380. The special device for this model is the tank and pump, mainly used for environmental sanitation cleaning and suction The total length of the tank is 3200mm, with a clean water tank at the front and a suction tank at the rear The total capacity of the clean water tank is 1.62 cubic meters, with an effective volume of 1.54 cubic meters. The transport medium is water, with a density of 1000 kilograms per cubic meter. The dimensions of the tank body (length x long axis x short axis) are 1400 × 1500 × 1100 in millimeters. The total capacity of the suction tank body is 2.02 cubic meters, with an effective volume of 1.93 cubic meters. The transport medium is liquid waste, with a density of 800 kilograms per cubic meter. The dimensions of the tank body (length x long axis x short axis) are 1800 × 1500 × 1100 in millimeters. Two tanks cannot be used simultaneously and cannot be fully loaded at the same time Only optional 2800mm wheelbase Optional direct power supply ETC onboard device The tire model 6.50R16C 10PR has a single tire load capacity of 975kg and a twin tire load capacity of 850kg Optional rear suction port style. | ||
【Chassis Technical Parameters】 | |||
Chassis Model | CA1041P40K50L1BE6A84 | Chassis name | Truck chassis |
Trademark name | liberation brand | manufacturing enterprise | China FAW Group Co., Ltd |
Number of axes | 2 | Number of tires | 6 |
Wheelbase (mm) | 2800 | ||
Tire specifications | 195/70R15 12PR,6.50R16 12PR,195/70R15 10PR,6.50R16 10PR,6.50R16LT 10PR,6.50R16C 10PR,195/70R15LT 10PR,7.00R16LT 8PR ,6.50R16LT 12PR,6.50R16C 12PR | ||
Number of steel plate springs | 3/4,3/3+1,3/3+2,3/7+3,3/1+1,1/1+1,2/3+2,5/7+6,3/3,3/4+3 | Front wheel base (mm) | 1520 |
Fuel type | diesel oil | Rear wheel base (mm) | 1475,1525 |
Emission standards | GB17691-2018国Ⅵ | ||
Engine model | Engine manufacturing enterprises | Emissions（ml） | Power (Kw) |
CA4DB1-12E6 | China FAW Group Co., Ltd | 2300 | 110 |
Q: Are you an original manufacturer?
A: Yes, we are a Chinese environmental protection equipment manufacturer and we have the comprehensive products you need.
Q: How is the quality of your products?
A: We have over 20 years of experience in the production of environmental sanitation equipment. All of our vehicles are carefully and rigorously inspected and maintained by our technical workers according to national and international standards. We will test each device before delivery until it works properly. We guarantee that every machine delivered to our customers has good performance and high quality.
Q: What is the price?
A: We have our own factory and many customers around the world. We have the best prices and can offer you lower prices because we are the main source.
Q: Do you provide after-sales service?
A: Yes, it is. Our new machine comes with a 12-month warranty, and in addition, we have a professional after-sales service team that can thoroughly and promptly solve your problems.
If you need more products or information, please send an inquiry
